Publicité
Les langues disponibles
Les langues disponibles
UK
1
.
G
e
n
e
r
a
l
I
1
.
G
e
n
e
r
a
l
I
1.1 General details
These assembly instructions are an integral part of the C
the term
PARTLY COMPLETED MACHINERY
of the final machine into which this
These instructions have been prepared with the purpose of providing to the technicians appointed to installation and maintenance of
the
PARTLY COMPLETED MACHINERY
ATTENTION:
NOTE:
1.2 Conventions and Definitions
1.2.1 General details
The assembly instructions of the
the lifetime of the
PARTLY COMPLETED MACHINERY
information necessary to the User of the
The entire documentation relative to the
Directive (2006/42/CE), by the PED Directive (97/23/CE), and by the safety Norms in force.
The configuration of certain components or devices described or depicted in the documents may differ from the one with which the
PARTLY COMPLETED MACHINERY
case, certain descriptions, references, or recommended procedures may have a general character, though preserving their efficacy.
Quoted drawings and photographs are provided as mere examples, to serve as references for a smoother comprehension of the text.
1.2.2 Terminological conventions
PARTLY COMPLETED MACHINERY
IPD: the acronym that stands for Individual Protection Device(s).
1.2.3 Definitions
D
ANGEROUS AREA
Any
near the
AREA
PARTLY COMPLETED MACHINERY
that very person.
U
SER
Any
(entrepreneur/company) who adequately uses the machine on which this
PERSON
entrusts its use or operations related to its use to prepared persons.
E
XPOSED PERSON
Any
who happens to be entirely or partially in a dangerous area or near such an area.
PERSON
M
ECHANICAL MAINTENANCE WORKER
who can intervene on any mechanical component to perform the necessary adjustments, repairs, and
QUALIFIED TECHNICIAN
maintenance interventions.
The mechanical maintenance worker is usually not licensed to perform interventions on electrical systems in the presence of voltage.
E
LECTRICAL MAINTENANCE WORKER
who is responsible for all interventions of electrical type (adjustment, maintenance, and repair) and who, when
QUALIFIED TECHNICIAN
necessary, operates in the presence of voltage inside the electrical cabinets and shunt boxes.
P
H
ERSONNEL APPOINTED TO
ANDLING
who performs the tasks of handling the
QUALIFIED PERSONNEL
require the use of lifting devices.
T
M
ECHNICIAN OF THE
ANUFACTURER
made available by the Manufacturer of the
QUALIFIED TECHNICIAN
circumstances or, at any rate, agreed with the user.
1.2.4 Individual Protection Devices and Behavioral Norms
The protective devices that the appointed personnel is responsible to use, and the behavioral norms that allow the operators to be
properly safeguarded, are indicated for each of the operations described in these instructions.
NOTE:
n
f
o
r
m
a
t
i
o
n
n
f
o
r
m
a
t
i
o
n
) manufactured by company R
PARTLY COMPLETED MACHINERY
the information and instructions that are essential to properly operate in safe conditions.
because they must be easily and readily available to be consulted, these instructions must be kept
in a known and accessible place.
The Purchaser can request copy of this document (for example, in case the original gets damaged)
in written form to the Technical Office of the Manufacturer (see Paragraph 1.4.1 – Request for
Assistance in this Chapter on the matter), undertaking commitment, at any rate, to return the
damaged copy.
PARTLY COMPLETED MACHINERY
(transport, installation, maintenance, and dismissal), to make it simple to find the relative
PARTLY COMPLETED MACHINERY
PARTLY COMPLETED MACHINERY
is equipped in its specific set-up made according with particular safety requirements or norms; in such
: the term used in these assembly Instructions to refer to the C
in which the presence of an exposed person represents a risk to the safety and health of
Paragraph 3.6 – General Warnings and Behavioral Norms in Chapter 3 – Safety and Technical
Data, in particular, reports a series of general recommendations to follow in order to avoid
conditions of risk to persons or of damages to the
RC-RCS (which are identified in this document with
EILING CUBIC UNIT COOLERS
.
.
.; for this reason, they must be part of the technical file
IVACOLD S
R
L
will be incorporated.
have been divided into chapters which allow the reader, for each phase of
.
has been prepared developing the themes indicated by Machines'
PARTLY COMPLETED MACHINERY
PARTLY COMPLETED MACHINERY
EILING CUBIC UNIT COOLERS
PARTLY COMPLETED MACHINERY
or the materials used, were the operation to
to carry out complex operations in special
PARTLY COMPLETED MACHINERY
RC-RCS Pag - 34 - REV 02 03/16
RC-RCS.
is installed, or who
.
Publicité
