Rivacold RC Serie Instructions D'assemblage page 39

Do not for any reason whatsoever use gasoline, solvents, or flammable fluids to clean the details, but use standardly marketed
and approved detergents that are not flammable and toxic.
Do not perform modifications, transformations, or applications on the
without first having obtained written authorization by the Manufacturer.
3.4 Signs concerning Safety
Signaling labels are affixed on the
Chart 2 – Description of the warning labels affixed on the
A
B
C
D
E
F
G
PARTLY COMPLETED MACHINERY
PARTLY COMPLETED MACHINERY
LABEL
Indicates that it is forbidden to remove the safety devices and protections
installed; it is usually accompanied by the explanatory wording:
THE PROTECTIVE DEVICES
Indicates that it is forbidden to perform any type of intervention (including
lubrication and cleaning) near moving parts; usually, it is accompanied by the
explanatory wording:
Warns about the danger due to the presence of mobile parts near the machine
area where it is positioned.
Warns about the danger due to the presence of hot surfaces near the machine
area where it is positioned.
Warns about the danger due to the presence of elements under voltage near the
machine area where it is positioned.
Signals that it is mandatory to read the manual / assembly instructions
Be careful for sharp cutting parts and when cleaning the air-cooled evaporator
PARTLY COMPLETED MACHINERY
that are indicated in Chart 2.
.
DESCRIPTION
.
DO NOT REPAIR OR ADJUST WHILE THE MACHINE IS RUNNING
which could jeopardize safety,
DO NOT REMOVE
.
RC-RCS Pag - 39 - REV 02 03/16
UK