ECOVACS DEEBOT Y1 Manuel D'instructions page 26

No. Malfunction
6 Robot is unable to charge.
Abnormal noise during
7
cleaning.
Robot gets stuck while
8
working and stops.
EN∣26
Possible Causes
Charging Dock is not connected to power
supply.
Robot's Charging Contacts are not connected
to the Charging Dock Charging Contacts.
Battery temperature is too high or too low.
Extended periods of non-use may lead to
over-discharge of the battery.
Side brush and Main Brush are entangled.
Dust Box and lter are blocked.
The Robot is in max mode.
Robot is tangled with something on the oor
(electrical wires, curtains, carpet fringing,
etc.).
Robot might be stuck under furniture with
an entrance of similar height.
Solutions
Ensure Charging Dock is connected to power and the
indicator is on.
Make sure that the Robot's Charging Contacts have
connected to the Charging Dock Charging Contacts and
START Button ashes.Check whether Robot's Charging
Contacts and Charging Dock Charging Contacts are dirty.
Please clean these parts according to the instructions in the
charpt Maintenance.
Please charge and operate the Robot in the temperature
between 0-40 degree.
We recommend using the product regularly. If extended
periods of non-use result in charging issues, please
contact customer service for assistance.
It is recommended to clean the side brush, main box,
dust box, lter, etc. regularly.
Change to standard mode .
Robot will try various ways to free itself. If it is
unsuccessful, manually remove the obstacles and restart.
Please set a physical barrier, or set a Virtual Boundary in
the ECOVACS HOME App.