Publicité
REAR BRAKE PAD INSULATOR INSPECTION
BRAKE FLUID LEVEL INSPECTION
EC36b000
REAR BRAKE PAD INSULATOR
INSPECTION
1. Remove:
9 Brake pad
Refer to "REAR BRAKE PAD INSPEC-
TION AND REPLACEMENT" section.
2. Inspect:
9 Rear brake pad insulator 1
Damage
EC367001
BRAKE FLUID LEVEL INSPECTION
1. Place the master cylinder so that its top is in
a horizontal position.
2. Inspect:
9 Brake fluid level
Fluid at lower level
a Lower level
ÅFront
ıRear
Recommended brake fluid:
DOT #4
w
9 Use only designated quality brake fluid to
avoid poor brake performance.
9 Refill with same type and brand of brake flu-
id; mixing fluids could result in poor brake
performance.
9 Be sure that water or other contaminants do
not enter master cylinder when refilling.
9 Clean up spilled fluid immediately to avoid
erosion of painted surfaces or plastic parts.
3-23
INSP
ADJ
Replace.
Fill up.
Publicité
