Laufen CLEANET ALVIA Notice D'utilisation page 20

6 CLEANING AND MAINTENANCE
CLEANING MODE
6.1
Cleaning mode (including nozzle extension) is activated by pressing rotary button on remote + lady
wash during 3 seconds, and nozzle will be extended for 5 minute and retract automatically or pressing
rotary button exits cleaning mode.
EN
6.1.1 MANUAL NOZZLE CLEAN / TIP REPLACEMENT
Press shower jet position for 3 sec, and nozzle will be extended for 5 minute and retract automatically
or pressing rotary button exits manual nozzle clean mode.
3s.
Press rear shower side panel button for 3 sec, and the nozzle will be extended for 5 minutes and
retract automatically or pressing stop button to exit manual nozzle clean mode.
3s.
Do not use aggressive product to clean. Only use neutral product for cleaning.
Do not pull or push the nozzle manually.
It is forbidden to pull out nozzle by hand directly.
6.2 REMOTE CONTROL CLEANING
Please take out the batteries before cleaning.
Please whip it softly with dampened cloth.
If the remote is too dirty, you may use diluted neutral de-
tergent to clean it.
It is forbidden to wash this product with water or detergent directly.
6.3
REMOTE CONTROL BATTERY
When any button is pressed during operation, the LED
will flash to indicate that the battery is weak, please
replace the battery.
The quantity of LED displays depends on the current
setting.
Please use AAA Alkaline battery. Do not mix the new and
used batteries nor different brands.
3s.
5 min.
x3
20
1 2 3 4