Laufen CLEANET ALVIA Notice D'utilisation page 19

5 AUXILIARY SIDE CONTROL
The auxiliary side control can be used to activate the main product functions: Rear shower, dryer and stop.
Rear shower and Dryer functions may only be activated when the lid is open and the device detects a user
seated.
Rear shower
REAR SHOWER WITH AUXILIARY SIDE CONTROL
This auxiliary side control allows the use with medium settings:
• Medium temperature
• Medium pressure
• Middle position
1. With the function activated, by pressing the same button again the oscillating func-
tion is activated. If it is pressed again, it returns to the normal mode.
2. To stop this function, press the stop button on the auxiliary side control.
The cleaning stops after 2 minutes if no other button is pressed.
3. If the drying button is pressed while the rear cleaning is taking place, the cleaning
stops and the drying is activated.
DRYING WITH AUXILIARY SIDE CONTROL
1. Press dryer button to activate function, the temperature and pressure settings of the
dryer function are preset to the medium level if activated through the auxiliary side
control.
2. To stop this function press the stop button on the auxiliary side control. If no other
button is pressed the drying stops after 5 minutes.
STOP WITH AUXILIARY SIDE CONTROL
It stops any activated function.
SYSTEM OFF (STAND-BY) / RESET OF THE PRODUCT
To switch off the CLEANET ALVIA, press the Power button on the auxiliary side
control for 3 seconds. To reactivate the CLEANET ALVIA, press the Power button on
3s.
the auxiliary side control. From that moment on the device carries out a power self-
calibration for 2 minutes; during this period of time water flows out of the nozzle. Do
not disconnect the device during this process.
Dryer Power / Stop
19
EN