Laufen CLEANET ALVIA Notice D'utilisation page 13

4 OPERATING THE SHOWER TOILET
4.1.2 SHOWER JET POSITION
The position of the shower jet can be adjusted to one of 5 settings. While showering,
you can turn the rotary button controller left or rightwards.
The shower jet follows the direction of rotation.
Turn the controller rightwards to move the shower jet front.
Turn the controller leftwards to move the shower jet back.
The jet position is factory preset to 3 out of a possible 5.
4.1.3
SHOWER OSCILLATION
While rear or lady showering, press shower jet position for consecutive 3 sec to
activate or deactivate oscillating cleaning mode.
With activating the oscillating cleaning function, the nozzle will be moved back and
front for widening the cleaning range.
REAR SHOWER PULSATING
4.1.4
While rear showering, press rear shower button for consecutive 3 sec to activate or
deactivate pulsating cleaning mode.
With activating the pulsating cleaning function, the water pressure cycles between
strong and soft in a certain rhythm for cleaning.
REAR INTENSE SHOWER PULSATING
4.1.5
While rear showering, press rear intense shower button for consecutive 3 sec to
activate or deactivate pulsating cleaning mode.
With activating the pulsating cleaning function, the water pressure cycles between
strong and soft in a certain rhythm for cleaning.
WATER TEMPERATURE ADJUSTMENT
4.1.6
While showering, after this temperature button press, turn the rotary control button to
increase or decrease the water temperature.
The temperature of the temperature can be adjusted to one of 5 settings.
Turn the controller rightwards to increase water temperature.
Turn the controller leftwards to decrease water temperature.
The parameters of these functions can be modified through the APP.
13
EN