Laufen CLEANET ALVIA Notice D'utilisation page 17

4 OPERATING THE SHOWER TOILET
TOILET SEAT/LID OPEN AND CLOSE
OPEN LID / SEAT
4.7
Press lid/seat button to open lid, press again the button to open seat.
CLOSE LID / SEAT
If lid and seat are opened, press lid/seat button to close both lid and seat. If lid is
opened and seat is closed, press twice (double press) lid/seat button to close lid.
AUTO OPEN LID AND SEAT
3s.
Press lid / seat button for consecutive 3 sec to set auto open ON or OFF.
Auto Open mode ON: Double acoustic signal.
Auto Open mode OFF: Long acoustic signal.
USER PROFILE
4.8
USER SELECT
Press user button to user profile selection.
Turn the controller rotary button left or rightwards to user selected.
Select your preferred setting parameter for:
Shower water pressure
Shower water temperature
Shower nozzle position
Massage (Pulsating/Oscillating shower)
Dryer temperature
Selecting user profile previouly saved (load profile):
1. Press user button.
2. Turn rotary button left or right to select user (5 user profiles available).
3. Press again user button or press rotary button to confirm selection.
4. Settings are loaded on product (rear water pressure, front water pressure, air
speed, water temperature, air temperature, shower nozzle position, pulsating mode,
oscillating mode)
Storing adjustments on user profile (save profile):
1. Press user button for 3 seconds.
2. Turn rotary button left or right to select user (5 user profiles available).
3. Press again user button or press rotary button to confirm selection.
4. Current settings are saved on user number selected (rear shower water pressure,
lady shower water pressure, air speed, water temperature, air temperature, shower
nozzle position, pulsating mode, oscillating mode)
The different profiles of the users are stored on the remote control.
APP stores the settings (user profile) of the smartphone user in the smartphone. Smartphone user
profile settings are not linked to the user settings stored in remote control.
� �
 1  1
17
� � �
 2
EN