Laufen CLEANET ALVIA Notice D'utilisation page 14

4 OPERATING THE SHOWER TOILET
4.2
EN
Do not insert finger or any objects into the fan.
Dryer function will stop automatically in 5 minute.
Automatic activation of dryer (Auto dryer mode) after shower duration ends can be set up by using
the Smart Control APP.
4.3
It will take a few minutes to heat the seat. The setting of desired temperature will be saved and locked
in memory.
Heated seat scheduled mode can only be set or deactivated by the APP.
DRYER
The temperature of the dryer can be adjusted to one of 5 settings.
Press dryer button to activate, turn rotary button to right or leftwards to adjustment air
wind flow (or air pressure/speed).
Oscillating dry
While drying, press dryer button for consecutive 3 sec to activate oscillating dry
function.
Dry temperature
Press temperature button to be pressed during drying function active, turn rotary
button to right (to increase) or leftwards (to decrease) to adjustment dry temperature.
The temperature of the dry can be adjusted to one of 5 settings.
Dry air speed
While dryer function is used, turn the rotary control button forwards to increase the air
speed, turn the rotary control button back to decrease the air speed.
Stop dry
Press rotary button to stop dry function.
HEATED SEAT
The temperature of the seat can be adjusted to one of 5 settings.
Press seat heater button to activate, turn rotary button to right (to increase) or left-
wards (to decrease) to adjustment temperature.
14