Laufen CLEANET ALVIA Notice D'utilisation page 16

Les langues disponibles

4 OPERATING THE SHOWER TOILET

4.6

OPERATING MODES LED LIGHTS

There are five operating modes for light in the CLEANET ALVIA:

MODE 1 standard:

This is the pre-set mode of the product.

The corner and bowl lights remain switched off while the CLEANET ALVIA is not in use.

The bowl light is ON when the user is detected. They remain switched on while the product is in use

and they switch off one minute after they stop detecting the user.

MODE 2 standard with night light only in the seat:

When this mode is activated, the lights of the CLEANET ALVIA switch on daily for 8 hours and during

the remaining 16 hours the CLEANET ALVIA remains in Standard mode.

MODE 3 standard with night light in the side panels and seat:

The corner and bowl lights are ON when the user is detected.

When this mode is activated, the lights of the CLEANET ALVIA switch on daily for 8 hours and they

remain switched off for the remaining 16 hours.

MODE 4: scheduled:

This mode allows to schedule the activation and deactivation of the e-bidet lights, by days of the week

and at personalized time slots.

This mode is only possible to be set by the APP. If mode 4 is selected via the auxiliary side control, and

no automatic activation or deactivation range has been programmed through the APP, it will act the

same as Mode 5 the e-bidet will act the same as in mode 5.

MODE 5 switched off:

Lights always switched off.

The Light mode may be modified by means of the auxiliary side control:

1. Press the Dryer button on the auxiliary side control for 3 seconds.

2. A numbered of beeps will be heard and the lights will blink indicating the mode of the CLEANET

ALVIA:

• MODE 1: 1 blink + 1 beep

• MODE 2: 2 blinks + 2 beeps

• MODE 3: 3 blinks + 3 beeps

• MODE 4: 4 blinks + 4 beeps

• MODE 5: 5 blinks + 5 beeps

3. Press successively the Dryer button to change to the next mode, until you reach the desired mode.

The lights blink 1, 2, 3, 4 or 5 times indicating the selected mode.

4. Press the Stop button on the auxiliary side control or on the remote control, to memorise the option,

or wait one minute and the last selected mode will be registered.

Use the APP to set the night light function to automatically turn off when a user is detected. Use the

APP to set the night light activated time and type of light activated (bowl or ambient).

Use the APP to adjust ambient light intensity.

5 s.