Table des Matières
Publicité
3. Data reception (Sequencer Section)
3.1 Messages recorded during recording
■Channel Voice Messages
●Note Off
Status
2nd byte
8nH
kkH
9nH
kkH
n=MIDI channel number:
0H - FH (ch.1 - ch.16)
kk=note number:
00H - 7FH (0 - 127)
vv=note off velocity:
00H - 7FH (0 - 127)
* Not received when the Note parameter(Recording Select window) is OFF.
●Note on
Status
2nd byte
9nH
kkH
n=MIDI channel number:
0H - FH (ch.1 - ch.16)
kk=note number:
00H - 7FH (0 - 127)
vv=note on velocity:
01H - 7FH (1 - 127)
* Not received when the Note parameter(Recording Select window) is OFF.
●Polyphonic Aftertouch
Status
2nd byte
AnH
kkH
n=MIDI channel number:
0H - FH (ch.1 - ch.16)
kk=note number:
00H - 7FH (0 - 127)
vv=Polyphonic Aftertouch:
00H - 7FH (0 - 127)
* Not received when the Poly Afertouch parameter(Recording Select window) is OFF.
●Control Change
Status
2nd byte
BnH
kkH
n=MIDI channel number:
0H - FH (ch.1 - ch.16)
kk=Control number:
00H - 78H (0 - 120)
vv=value:
00H - 7FH (0 - 127)
* Not received when the Control Change parameter(Recording Select window) is OFF.
●Program Change
Status
2nd byte
CnH
ppH
n=MIDI channel number:
0H - FH (ch.1 - ch.16)
pp=Program number:
00H - 7FH (prog.1 - prog.128)
* Not received when the Program Change parameter(Recording Select window) is OFF.
●Channel Aftertouch
Status
2nd byte
DnH
vvH
n=MIDI channel number:
0H - FH (ch.1 - ch.16)
vv=Channel Aftertouch:
00H - 7FH (0 - 127)
* Not received when the Channel Aftertouch parameter(Recording Select window) is OFF.
●Pitch Bend Change
Status
2nd byte
EnH
llH
n=MIDI channel number:
0H - FH (ch.1 - ch.16)
mm, ll=Pitch Bend value:
00 00H - 40 00H - 7F 7FH (-8192 - 0 - +8191)
* Not received when the Pitch Bend parameter (Recording Select window) is OFF.
3rd byte
vvH
00H
3rd byte
vvH
3rd byte
vvH
3rd byte
vvH
3rd byte
mmH
■Channel Mode messages
●All Sound Off (Controller number 120)
Status
2nd byte
BnH
78H
n=MIDI channel number:
0H - FH (ch.1 - ch.16)
●Reset All Controller (Controller number 121)
Status
2nd byte
BnH
79H
n=MIDI channel number:
0H - FH (ch.1 - ch.16)
●Omni Off (Controller number 124)
Status
2nd byte
BnH
7CH
n=MIDI channel number:
0H - FH (ch.1 - ch.16)
* The same processing will be done as when an All Note Off message is received.
●Omni On (Controller number 125)
Status
2nd byte
BnH
7DH
n=MIDI channel number:
0H - FH (ch.1 - ch.16)
* The same processing will be done as when an All Note Off message is received.
●Mono (Controller number 126)
Status
2nd byte
BnH
7EH
n=MIDI channel number:
0H - FH (ch.1 - ch.16)
mm=mono number:
00H - 10H (0 - 16)
* The same processing will be done as when an All Note Off message is received.
●Poly (Controller number 127)
Status
2nd byte
BnH
7FH
n=MIDI channel number:
0H - FH (ch.1 - ch.16)
* The same processing will be done as when an All Note Off message is received.
Implémentation MIDI
3rd byte
00H
3rd byte
00H
3rd byte
00H
3rd byte
00H
3rd byte
mmH
3rd byte
00H
307
Publicité
Table des Matières
