Ravaglioli KPE32 Traduction Des Instructions Originales page 51

INDEX
CH. 4 GENERAL SAFETY PRECAUTIONS
4.1 INDICATION OF OUTSTANDING RISKS
Our lift has been manufactured according to the most stringent standards required by applicable directives.
Risk analysis has been carefully made and all hazards have, as far as possible, been eliminated. Any outstanding risks are evidenced
in this manual and on the machine by pictograms.
4.2 SAFETY PLATES AND/OR STICKERS
There are plates and stickers on the lift to identify the machine, its capacity, instructions and electrical system.
In the event of these pictograms being damaged, they must be replaced by new ones available from RAVAGLIOLI.
4.3 STAFF TRAINING
The equipment may only be operated by specially trained and authorised staff.
To ensure that the machine is used in the best possible way and that work can be carried out efficiently, the staff responsible for the
machine must be properly trained to handle the necessary information in order to achieve an operative method in line with the
instructions supplied by the manufacturer.
For any doubts concerning use and maintenance of the machine, refer to the instructions manual and, if necessary, authorised technical
service centres or the RAVAGLIOLI technical service department.
4.4 SUITABILITY FOR USE
This product has been manufactured in compliance with the European Directive 2006/42/CE. According to article 4.1.2.3 (Annex 1)
of this Directive, the coefficients used for the tests are as follows:
1.10 for the Dynamic test
1.25 for the Static test
These tests must be performed by specialised personnel.
4
5
1
SINGLE STICKER FOR 3200 Kg
1 999925250
2 999912810 SERIAL NUMBER PLATE
3 999925100 CAPACITY PLATE 3200 KG
4 99990758 HAZARD PLATE
5 999912380 400V PLATE
EN_10 0474-M002-0
2
3
KPE32 - KPC32