SilverCrest SMWC 700 C1 Mode D'emploi page 27

has been set.
Example:
You would like to defrost some food using a defrosting programme and then start cooking
programme P50.
 Set the defrosting programme as described in section "1 1.4. Defrosting programme" on
page 26 without subsequently pressing the
 Set the P50 programme as described in section "1 1.2. Cooking programme" on page
25.
 Then press the
after another.
11.6. Automatic programme
It is not necessary to set the cooking time or power level for the automatic programme. The
product automatically determines the values depending on the foodstuff and weight input.
 Turn the control knob (14) clockwise. A programme number appears on the display (3)
(e.g. "A-1" for automatic programme 1).
 Select an automatic programme from A-1 to A-8.
The corresponding symbol flashes on the display (3).
 Press the
start button (13) to confirm the selection.
 Now select the desired weight. To do this, turn the control knob (14) until the desired
portion size is displayed.
The weight/amount is shown on the display (3).
The amount can be set according to the following table:
Program
A-1 Heating
A-2 Vegetables
A-3 Fish
A-4 Meat
A-5 Pasta
28 - English
start button (13) to start the programmes. Both programmes run one
Weight
200 g
400 g
600 g
200 g
300 g
400 g
250 g
350 g
450 g
250 g
350 g
450 g
50 g
(+ 450 ml water)
100 g
(+ 800 ml water)
start button (13).
Display
200
400
600
200
300
400
250
350
450
250
350
450
50
100
Output
700 W
700 W
560 W
700 W
560 W