MAHLE eX1 Manuel D'utilisation page 4

MAHLE External Battery eX1 · Introduction
004
V.1.0.3 - 07/2024
1. Introduction
Thank you for choosing the External Battery eX1 for your new SmartBike.
The External Battery eX1 allows you to go further on your travels, helping you
on long journeys that the eBike cannot complete by itself. The My SmartBike
External Battery enables fast charging. LED bar displays battery level or
performance mode.
Please read this manual carefully before operating the system. Failure to
do so or misunderstanding of the instructions may lead to serious injury or
death.
Products and specifications are subject to change without prior notification.
This document has been drawn up
prevail in the event of any translation error or misunderstanding in the client's
interpretation of translations herein.
This manual includes instructions for the External Battery eX1 compatible
with the X20 System (or compatible systems).
All relevant documents for the product or any other compatible system,
including this user manual, can be downloaded from our website:
mahle-smartbike.com.
in English and the content herein shall
Components must only be replaced with an original MAHLE SmartBike
Systems replacement to maintain the safety of the entire system. Any
tampering, modification or repair by a third party not authorised by MAHLE
shall immediately void the warranty conditions and original certification, and
MAHLE shall not be held responsible in regard to civil liability.
Repairs and replacements must only be performed by MAHLE SmartBike
Systems, hereinafter MAHLE, certified partners.
This manual must not be duplicated except in its entirety, unless prior written
approval has been obtained from MAHLE SmartBike Systems.
1.1. General Warnings
Please pay special attention to any warning symbols on the system, shown
with these graphics.
DANGER
X
WARNING
CAUTION
NOTICE