MAHLE eX1 Manuel D'utilisation page 38

038
MAHLE External Battery eX1 · Service
V.1.0.3 - 07/2024
5.3. Error codes
Here you can find a short list of potential error codes that may appear on
the HMI. For more information, check with your local dealer or the MAHLE
technical service:
-> Flashing Red (ERROR)
Code Head Description / Action
Unit
210 Power output limited
The temperature is too high, so the power output will be
limited until normal operating conditions are restored.
To do so:
1.- Please lower the assistance level or take a break
while the temperature drops
Or
2.- Switch off the External Battery eX1 and continue
your ride with the main battery.
-> Flashing Orange (WARNING)
Battery Imbalance
211
Please fully charge your External Battery eX1. If the
error persists or happens again, please contact your
dealer.
220
External battery charging current is too high for
charging.
1.- Please check whether the External Battery and
Charger are in good condition.
2.- If you need help or if everything is correct but the
error persists, take the Charger and External Battery
to your bike shop or dealer.