MAHLE eX1 Manuel D'utilisation page 18

MAHLE External Battery eX1 · Operation and Use
018
V.1.0.3 - 07/2024
Our product is designed as per the requirements and standards established
for use in EPAC applications and as per the particular environmental
conditions in which these kinds of applications may be used, such as rain,
salty areas, mud, etc.
The MAHLE External Battery eX1 goes beyond what the standards require,
but please also pay attention to what the eBike manufacturer specifies
regarding system integration and design information. In particular:
• Only clean the system as per the specific MAHLE recommendations set
out in this manual. Never use a power washer to clean your eBike or the
electronic components of your eBike.
• When storing your External Battery eX1, ensure all of the batteries have
been sufficiently charged.
3.3.2. Prohibited usage
Our system must not be integrated into a non-compatible EPAC certified
under EN 15494 or into a regular bicycle. It is in breach of MAHLE standards
to manipulate the legal parameters (speed or power), to repair the battery or
to reuse it for any other device or EPAC. It is in breach of MAHLE regulations
to tamper with our components, to change the software and firmware
designed and approved by MAHLE or to add electronic components which
modify the maximum assisted speed. If MAHLE terms are breached by non-
compliance with the above, MAHLE shall not be held legally responsible for
damages caused to individuals or materials.
The MAHLE External Battery eX1 reserves the right to include functions
which can analyse and record any kind of abnormal behaviour, such as a
maximum speed that is too high or abnormal data communication, which
could be caused by tampering with the system. Any kind of manipulation
shall immediately void all MAHLE warranty terms.