MAHLE eX1 Manuel D'utilisation page 17

NOTICE
If the wire installation is not neat, please adjust the holder height installation
using the slotted holes.
3.2. Operation mode
To operate the system correctly, ensure that the eBike system (including the
rear wheel) is fully connected and correctly assembled.
To ensure the proper use of the External Battery eX1, first disconnect the
charging wire from the charging port of the eBike.
Ensure the External Battery eX1 is fully charged before using it for the first
time. To do so, we recommend keeping the External Battery eX1 connected
to the power supply and charger for at least 2 hours. For additional
information on how to charge your External Battery eX1, please go to
chapter "3.4.4 Charging Process".
Before starting to ride, always ensure your battery is sufficiently charged.
3.3. Usage
The External Battery eX1 is designed to be used as an external battery to
provide additional capacity to any MAHLE Smartbike System compatible
eBike system.
3.3.1. Intended usage
Our product is intended to act as a External Battery of an Electrically Power
Assisted Cycle (EPAC) (not for any other eBike application). All compatible
components were designed to be incorporated into a complete eBike
produced by a professional bicycle manufacturer.
The system is designed to be used under current standardised norms and
certifications:
• Europe: EN15194:2017
• US / CAN (in progress): UL2849, UL 1310 (battery charger)
• Australia: EN15194
017