Napoleon Riverside Serie Manuel D'installation Et D'utilisation page 14

venting requirements (optional)
EN
4.1 minimum air terminal location clearances
Canada installations: In accordance with the current CSA B149.1, Natural Gas and Propane Installation Code.
U.S.A installations: In accordance with the current ANSI Z223/NFPA 54 National Fuel Gas Code.
FP
INSTALLATIONS
CANADA
A 0" (0mm)
Clearance to windows or doors that may be opened, or permanently closed windows:
B 12" (305mm)
24" (610mm)
36" (914mm)
C
60" (1524mm)
Clearance to inside corner:
6" (152mm)
D
9" (229mm)
48" (1219mm)
See heat management requirements.
E
See heat management requirements.
F
G 6" (152mm)
36" (914mm)
H
I 36" (914mm)
12" (305mm)
J
K 72" (1829mm)
72" (1829mm)
L
72" (1829mm)
Refer to local building codes/
M
regulations for proper clearances.
14
W415-10001315 / D-0 / 07.10.24
Fireplace opening.
Fireplace not permitted.
B
G B
M
I
I
FP
U.S.A.
Clearance above grade, veranda porch, deck, or balcony (to base of appliance).
Non-vinyl
Vinyl
Clearance to unventilated soffit.
Clearance to ventilated soffit.
Clearance to vinyl soffit or below electrical service.
Non-vinyl siding 1 side.
Non-vinyl siding alcove.
Vinyl siding/windows.
Vertical terminal clearance to adjacent wall including neighbouring building.
Vertical terminal clearance above roof.
Clearance to outside corner.
Clearance to service regulator vent outlet.
Clearance to each side of centerline of gas meter/regulator vent outlet.
Clearance to any non-mechanical air supply, or combustion air inlets to other appliances (mechanical or non-
mechanical).
36" (914mm) Clearance to mechanical air supply inlet or exhaust.
Clearance under a veranda, porch, deck, balcony, or overhang (from base of the appliance).
Vinyl or composite (from base of the appliance).
Appliances facing or open onto public property servicing more than one single family dwelling, such as
driveways, sidewalks, etc.
E
F
C
D
FP
L
J
FP
K