Publicité
Les langues disponibles
Les langues disponibles
WARNING: When cleaning in a dishwasher
the filter may discolour as a result of the salt
content. This does not affect its operation.
WARNING: If the instructions above are not
carried out, serious soiling can cause a fire
hazard.
After cleaning
− Using the grips, replace the grease filter in the right
direction in the extraction opening.
− Replace the inlet grille in the extraction opening.
− Reset the grease filter indicator (see 7.1).
9.2.4 Replacing the monoblock recirculation filter
(1861 only)
− Remove the inlet grille (see 9.2.1).
− Remove the grease filter (see 9.2.3).
− Grasp the monoblock recirculation filter, tilting it
forwards.
− Fold both corners over and remove the monoblock
recirculation filter from the extraction opening.
After replacing:
− Fold back the corners of the new monoblock
recirculation filter and replace it in the frame through
the extraction opening.
− Press the filter right up against the frame.
− Using the grips, replace the grease filter in the right
direction in the extraction opening.
− Replace the inlet grille in the extraction opening.
− Reset the recirculation indicator (see 7.2)
– 142 –
Publicité
