5.3.7 Stop & Go function
This function temporarily interrupts the activity of the
hob and allows a restart with the same settings.
Switching on
II
Press
for 2 seconds until it blinks.
Switching off
II
Press
for 2 seconds.
Select a cooking zone with the zone
selection key.
5.3.8 Recall function
After turning the hob off
the last selected settings: (this up to a maximum of
10 seconds).
− State of all cooking zones (power).
− Minutes and seconds of the programmed cooking
zones by the timers.
− "Automatic cooking" function.
− Keep warm function.
The recall procedure is as follows:
− Push the control key
II
− Push
before the flashing stops.
The previous settings are now active again.
Turning Stop & Go on and off:
, it is possible to recall
for 2 seconds.
– 127 –
Display
I I
0‐9