6.5
Extractor controls
6.5.1 Switch on and off
Increase extraction power
Press the zone selection button of the
extractor.
Slide over the "SLIDER".
Reduce extraction power
Press the zone selection button of the
extractor.
Slide over the "SLIDER".
Switch off extractor
Press the zone selection button of the
extractor.
Slide over the "SLIDER".
Switch on automatic extraction
Press the zone selection button of the
extractor and keep pressed for 3 seconds.
Switch off automatic extraction
Press the zone selection button of
the extractor and keep pressed for 3
seconds.
Switch on delay function
Press
.
Switch off delay function
Press
Automatic extraction
This function automatically adjusts the extraction power
depending on the power used of the cooking zone(s).
When this function is active when switching off the
appliance, it is automatically activated when switching
on again.
Tip: the extraction power can be changed quickly by
sliding over the "SLIDER".
This action temporarily halts the automatic extraction.
The automatic extraction is reactivated the next time
the appliance is switched on.
again.
Extractor
– 132 –
Display
0 ‐ 9
9 ‐ 0
0
A
0
A
1
or
LED
goes out