Publicité
Les langues disponibles
Les langues disponibles
9.2
Maintenance of the extractor
9.2.1 Remove the inlet grille
Do not use any objects that could damage
the inlet grille, such as potscourers, scouring
agents or aggressive cleaning agents.
First switch off the hob and the delay before
removing components from the extractor.
− Press on the right of the inlet grille until it tilts.
− Grasp the inlet grille and put it aside safely on the
kitchen worktop.
Do not place the inlet grille on the hob glass
to avoid scratches. Do not place the inlet
grille on a hob that has been switched on to
prevent it heating up.
9.2.2 Replace inlet grille
Take care that the Monoblock filter and
grease filter have first been placed in the
appliance before replacing the inlet grille.
Grasp the inlet grille and insert it in the centre of the
extraction opening in line with the position marks.
– 140 –
Publicité
