Publicité
Les langues disponibles
Les langues disponibles
EN
GETTING
STARTED
Unbox your Bluefin vibration plate and place it on a flat, hard surface. If the
surface is slightly uneven, adjust the feet under the plate. If you live in a flat
or an apartment building we recommend placing a yoga mat or rug beneath
the plate to absorb any noise. Bluefin fitness plates are very quiet but all
vibration plates make at least some noise.
Your wearable remote comes with a battery. To replace it, slip the remote
control out of the wearable strap and open the back. Insert 1 x Lithium
CR2032 battery inside. Be sure to replace the back cover and click it into
place before putting the remote in its strap.
Insert the power cable into the back of the plate and plug the other end into
the electrical outlet. Make sure the plate is close enough to the electrical
outlet that the cord is not stretched. Ensure that the power switch next to
the plug is turned on. If the switch is illuminated, the machine is on. When
not in use, switch the machine off and ensure that this button is not
illuminated.
Familiarise yourself with the screen and remote before stepping onto the
plate. Place your feet on either side of the plate for more intensity and better
balance. Please be sure to step on the plate slowly and carefully before
starting any workout setting. We recommend beginning with speeds below
15 in manual mode before moving to higher speeds or the programmed
functions.
Publicité
