Manual Pumping
VIlI
Follow steps 1–7 (excluding step 4) on page 3/4/5
8
9
Cleaning and Hygiene
IX
Important
+
a b c d
• U se drinking water quality for any of the following described
cleaning procedures.
• C lean parts immediately after use to avoid dry up of milk
residues and to prevent from growth of bacteria.
• D isassemble all parts prior to cleaning. Especially be sure
to remove the yellow valve head from the breastshield and
separate the white valve membrane from the valve head.
Screw cylinder into breastshield.
g
h
i
j
Set the vacuum regulator to minimum
and start pumping. Adjust the vacuum to
your
Maximum Comfort
This is the highest vacuum you can use
and still feel comfortable (different for
every mother). To find your Maximum
Comfort Vacuum increase vacuum until
pumping feels slightly uncomfortable
(not painful), then decrease slightly.
Vacuum™.
EN
11