Publicité
Les langues disponibles
Les langues disponibles
NOTICE
TO PREVENT COSMETIC DAMAGE
Do not use scouring pads, abrasive cleaners, strong liquid chemicals, steel
wool, or oven cleaners, as these may damage the control panel finish.
For best results, it is recommended to clean the user interface and control
panel after each use. Control knobs can be removed for easier cleaning. Ensure
knobs are in the "OFF" position before removing. Pull straight back with a firm
pressure to remove knob from stem. Clean entire panel with a lightly damp soft
cloth using mild soap and water. Glass cleaner can be used on oven control to
remove streaks. Stainless steel cleaner can be used on the exposed metal to
remove streaks. Knobs should be washed by hand in warm soapy water - do
not wash in dishwasher. Wait until knobs are dry before placing back on stem.
Be sure to align profile in knob to stem shape to ensure smooth fit and avoid
damage to knob or control.
Oven Interior:
CAUTION
BURN HAZARD
• Oven surfaces - especially oven bottom - may be hot. Use caution to avoid
contact with hot surfaces.
• Hot surfaces may create hot steam in wet sponge or cloth while cleaning. If
steam is evident when wiping out oven, wait until oven has cooled.
Check oven after each use to determine if any spills or splattering occurred
that require cleaning. Wipe out oven interior with a lightly damp soft cloth
using mild soap and water to remove light spills.
EN-47
Publicité
