Publicité
Les langues disponibles
Les langues disponibles
BEFORE USING YOUR NEW RANGE FOR THE FIRST TIME:
1. Ensure all packaging, literature, removable labels, and protective plastic film
are removed. Check inside oven, inside drawer, and around door and trim
edges carefully.
2. While cool, wipe down all surfaces, including inside oven and drawer, with a
damp cloth to remove dust that may have settled during shipping and
storage.
3. Familiarize yourself with the controls and features described in this manual.
4. Confirm that surface elements and oven operate as intended. Contact Midea
customer service at 1-888-365-2230 or by visiting midea.com/ca/support
immediately if appliance is not working as expected.
5. Start the oven in BAKE mode at the highest available temperature setting.
Allow oven to run for 1 hour to remove any dust or impurities. There will be
a distinctive odor - this is normal. Ensure your kitchen is well ventilated
during this conditioning period.
NOTE
1. The clock function on this range has two available time settings. 12-hour or
24-hour time.
2. The range is programed with the 12-hour time mode set as the default
setting.
3.
Before setting the clock, make sure the oven and timer are off.
4. If you would like to change the time mode from the default setting, you must
change it before setting the clock.
HOW TO SELECT THE 12-HOUR OR 24-HOUR TIME SETTING:
1. To switch the clock mode from 12-hour or 24-hour time, press the "CLOCK"
pad, and hold for 3 seconds.
2. After 3 seconds, 12 or 24 will appear on the display.
- If the display shows "12" you are switching the time mode to 12-hour time.
- If the display shows "24" you are switching the time mode to 24-hour
time.
3. Once your desired time mode appears, the display will automatically switch
back to the clock display indicating that your time mode has been updated.
HOW TO SET THE CLOCK
After the desired time setting mode has been selected you can now set the
clock time on the range.
1. To set the clock, press the "CLOCK" pad, and the hours will begin to flash,
press the "+ or –" pad to adjust the hour. To lock in the hour, press the
"CLOCK" pad.
2. Once the hour is locked in, the minutes will begin to flash on the display, next
press the "+ or –" pad to adjust the minutes. To lock in the minutes, press the
"CLOCK" pad.
3. The clock time on your range is now set.
EN-31
Publicité
