Publicité
Les langues disponibles
Les langues disponibles
REMOVING/INSERTING RACKS:
CAUTION
BURN HAZARD
• Always place oven racks in the desired location while oven is cool. If rack
must be moved while oven is hot, do not let pot holder contact hot oven
surfaces.
Oven Racks:
Flat Rack: Versatile and low profile, each range is
supplied with one or more flat oven racks. Flat
racks slide in and out of oven on rack guides
formed into side of oven wall. Multiple racks can be
used simultaneously, if desired.
If racks do not move smoothly,
use the corner of a paper towel to apply a thin
layer of vegetable oil to reduce friction. Wipe off
any excess before use.
Removing Rack: Racks are designed to stop
before coming completely out of the oven to
reduce the risk of dropped or spilled foods. To
remove the rack:
1. Remove all food and utensils from rack.
2. Grasp firmly from both sides.
3. Pull rack out until it contacts the stop position.
4. Lift up on the front of the rack and continue
pulling outward.
Inserting Rack: The rack can be installed in only
one direction.
To insert the rack:
1. Orient the rack so that the handle is towards
the front and the interlock features are on the
top side.
2. Tip rack so that the front is several inches
higher than the back.
3. Slip the interlock features under the stop
position on the rack guides formed in the oven
walls.
4. Rotate rack down while pushing back to
complete the insertion process.
EN-34
Publicité
