Publicité
Les langues disponibles
Les langues disponibles
Remove Old Appliance
WARNING
FIRE,EXPLOSION HAZARD
• Installation and service must be performed by a qualified installer or service
agency.
CAUTION
LACERATION, FOREIGN OBJECT, CRUSH HAZARD
• When installing, moving, or servicing any appliance, wear proper protective
equipment, including cut resistant gloves, steel-toed shoes, and safety
glasses.
If the new range is replacing an existing installation, first remove the old
appliance.
Directions:
• Shut off the electrical supply to the range at the breaker box or fuse box.
Leave it off until the installation has been completed.
• Move appliance to access the electrical connections.
• Disconnect electrical connections and move appliance out of and away from
installation space.
Electrical Supply Requirements
WARNING
ELECTRICAL SHOCK HAZARD
• Installation must be electrically grounded in accordance with local codes or,
in the absence of local codes, with the National Electrical Code, NFPA 70 or
the Canadian Electric Code, CSA C22.1-02.
Clearances and Dimensions:
IMPORTANT
TO PREVENT DAMAGE TO CABINETS
• This range has been designed to comply with the maximum allowable
wood cabinet temperature of 194 °F (90 °C). Make sure the wall coverings,
countertops, cabinets, and any other materials in contact with the range are
rated for a minimum of 194 °F (90 °C). If not, discoloration, delamination, or
melting may occur.
EN-16
Publicité
