Publicité
Les langues disponibles
Les langues disponibles
Installation Instructions
ANTI-TIP BRACKET INSTALLATION
WARNING
Anti-Tip Bracket
Leveling Leg
To reduce the risk of tipping of the range, the range must be secured to the
floor by the properly installed anti-tip bracket and screws packed with the
range. Failure to install the anti-tip bracket will allow the range to tip over if
excessive weight is placed on an open door or if child climbs upon it. Serious
injury might result from spilled hot liquids or from the range itself.
The anti-tip kit is provided with the range. If the anti-tip bracket is missing,
damaged, or needs replaced, a replacement kit will be provided free-of-charge
by contacting Midea customer service at 1-888-365-2230 or by visiting
midea.com/ca/support.
If range is ever moved to a different location, the anti-tip brackets must also be
moved and installed with the range. If range is removed from service, secure
door closed or remove door to minimize tip over risk.
(See "Door Removal and Reinstallation" section in this manual or
under "Cleaning and Maintenance" in the User's Manual for instructions on how
to remove door.)
TIP OVER HAZARD
• A child or adult can tip the range and be killed.
Verify the anti-tip device has been properly
installed and engaged per installation
instructions.
Ensure the anti-tip device is re-engaged when
the range is moved.
• Do not operate the range without the anti-tip
device in place and engaged. Failure to do so
can result in death or serious burns to children
or adults. Do not remove the leveling legs.
Doing so will prevent the range from being
secured by the
anti-tip device.
EN-25
Publicité
