Publicité
Les langues disponibles
Les langues disponibles
5.
Check to make sure the back leg of
the range has engaged properly into
the anti-tip bracket.
If visual inspection is not possible:
- Slide range forward
- Confirm anti-tip bracket is securely
attached to floor or wall in correct
position according to installation
instructions.
- Fully slide the range back against
the wall so that leveling leg
engages with anti-tip bracket.
DOOR REMOVAL AND REINSTALLATION:
WARNING
FIRE HAZARD
• If door is removed, confirm that door operates correctly and seals properly
when reinstalled. If door gasket does not seal completely, heat escaping
from around doors could ignite cabinetry.
During installation, service, gas conversion, and leveling, it may be easier to
perform the necessary work if the oven door is removed. This makes the
appliance lighter and access to the oven cavity easier. Follow these
instructions below to remove and reinstall the door.
Door can be removed for easier cleaning, servicing, or installation:
1. Open door full
2. On each door hinge, flip down the lock mechanism so that it engages with
the door when the door is rotated towards being closed.
3. Once both lock mechanisms are engaged, continue to rotate do until ~2-3
inches from being fully closed.
4. Grasp door firmly from the sides and lift door up and out from oven face.
Do not lift door by door handle to reduce risk of broken door glass.
EN-27
Publicité
