Publicité
Les langues disponibles
Les langues disponibles
REINSTALLING DOOR:
1. Holding door from the sides, align door so that hinges slip back into
openings.
2. Rotate door until ~2-3 inches from being fully closed, allow door to drop
into notches on hinges.
3. Rotate door out until fully open.
4. Flip the hinge locking mechanism back up and away from the door.
5. Check that door opens and closes correctly.
6. If door does not operate correctly, re-engage locking mechanisms,
remove door, and reattempt installation.
Drawer Removal and Reinstallation:
During installation, service, and leveling, it may be easier to perform the
necessary work if the drawer is removed. This makes the appliance lighter
and visibility of anti-tip bracket is improved.
Follow these instructions below to remove and reinstall the drawer.
To remove drawer, fully extend drawer and pull up,then pull out the
drawer.
To reinstall the drawer, align the rails on the drawer with the slides on the
range and push drawer in until fully closed. Open and close drawer to
ensure slide rails are operating properly.
EN-28
Publicité
