Publicité
Les langues disponibles
Les langues disponibles
6.3.3 Time Setting
When the cursor is pointing at "Set date & Time", press OK to enter the date &
time settings. The LCD screen will display the time and date that are set. Press
START and HOME to move the cursor. At this time, press OK and the cursor will
flash. Adjust the time by tapping START and HOME, click OK to confirm. Click
"ON/OFF" to return to the previous menu.
6.3.4 Password Setting
When the cursor is pointing at "Change Pin Code", press OK to enter the
password settings. The LCD display requires the input of a previous
password/PIN. Currently, press START and HOME to change the numbers of
the password/PIN and press OK to confirm. If the old password/PIN is entered
incorrectly, "Wrong PIN code" will be displayed. You will be redirected to put in
a previous password/PIN again. In case the old password/PIN is correct,
"Right PIN code" will be displayed and you will be redirected to the new
password/PIN page. After entering the new password, press OK and the screen
will display "PIN code changed" before returning to other menu pages.
Original instructions
33
Publicité
