Publicité
Les langues disponibles
Les langues disponibles
Original instructions
6.1.1 Rain Delay Settings
With the cursor on "Rain delay", press the OK button to enter the rain delay
setting. If the ROBOTIC MOWER's rain delay is turned on, the LCD screen will
display the default rain delay time. Click the OK button to turn off the rain delay.
If the ROBOTIC MOWER is not turned on, click the OK button to turn on the rain
shower delay. At this time, press the START and the HOME buttons to move the
cursor. After pressing the OK button, the cursor flashes and the time can be
adjusted by pressing the START and HOME buttons. Click the OK button again to
confirm, and press the "ON/OFF" button to return to the previous menu.
6.1.2 Starting Point Settings
With the cursor on "Starting point", press the OK button to enter the starting
point setting. If the ROBOTIC MOWER's starting point setting has been opened,
the LCD screen will display the default starting point setting. Click the OK button
to close the starting point setting. If the starting point of the ROBOTIC MOWER
is not turned on, press the OK button to turn on the starting point. At this time,
press the START and HOME buttons to move the cursor. When the cursor moves
to the "unit" line, press the OK button to switch to the "meter/center" mode.
Press HOME to continue moving down. When the cursor moves to the
"How often" / "Dis" column, press the OK button to flash the cursor and then
click START and HOME to move up and down. Press longer to quickly go
up/down. Click the OK button again to confirm. If the ROBOTIC MOWER is
equipped with an automatic starting point function: Add an "Auto" line, press
the OK button to "turn on / off", then press the "ON/OFF" button to return to
the previous menu. If "Auto" is turned off, press the START and HOME buttons
to move the cursor, referring to the operation without configuring "Auto".
26
Publicité
