Publicité
Les langues disponibles
Les langues disponibles
7. Software update
The software can be updated when new versions are available. The latest
software can be downloaded from our website. Update via USB. See below
for download and installation instructions:
(1) Save the file to an empty FAT32 formatted USB (flash drive). Delete any
other files on the drive and check the format. If the drive is not formatted
in FAT32, please reformat the drive.
(2) Place Mower on a secure and level surface. Press ''ON/OFF'' to turn off
your mower.
(3) Insert the USB drive (flash drive) in the port. (See Fig. Q1)
(4) Turn Mower on. The update will begin automatically. Wait until the
display shows USB, then remove the USB drive (flash drive) and tightly close
the protective cover.
(5) The manual included with your Mower is based on the default software
at the time of production. Some new features/functions in the new version
may not exist in the manual.
8. Maintenance
Risk of injury!
Carefully read the section "Safety instruction" , particularly the subsection
"Maintenance and storage" , and follow all safety instructions exactly before
performing any maintenance or cleaning operations on the machine. Activate
the disabling device prior to any maintenance or cleaning work. Disconnect
the mains plug before performing any maintenance operations on the
docking station.
Your Mower works hard and needs to be cleaned and checked from time to
time. Some parts will require replacement as they become worn. Switch off
the machine before carrying out any service or maintenance. Here's how to
take care of your Mower.
Maintenance and storage
a. Keep all nuts, bolts, and screws tight to be sure the machine is in safe
working condition.
b. Check the grass catcher frequently for wear or deterioration.
c. Replace worn or damaged parts for safety.
d. Ensure that only replacement cutting means of the right type are used.
e. Ensure that batteries are charged using the correct charger
recommended by the manufacturer. Incorrect use may result in electric
shock, overheating or leakage of corrosive liquid from the battery.
f. In the event of leakage of electrolyte flush with water/neutralizing
agent, seek medical help if it comes into contact with the eyes, etc.
g. Servicing of the machine should be according to manufacturers'
instructions.
Original instructions
35
Publicité
