Publicité
Les langues disponibles
Les langues disponibles
Original instructions
The cable between the power supply unit and docking station must not be
extended. The power supply unit and cable must not be left on wet ground
for prolonged periods.
Danger of electric shock!
Damaged cables, connectors and plugs, or electric cables which do not
conform with regulations may not be used.
Always ensure that the power cables used are adequately protected by a
fuse.
Detach electric cables at the plug and socket and not by pulling on the
electric cable.
Only connect the machine to a power supply that is protected by means of
a residual current-operated protective device with a release current of a
maximum of 30 mA. Your electrician can provide further information.
If the power supply unit is connected to the mains supply outside a building,
the socket must be approved for outdoor use. Your electrician can provide
further information about country-specific legislation.
It must be noted that current fluctuations can damage the machine when
it is connected to a power generator.
1.1 The charging station can be placed near the tool house OR house, when
laying the boundary wire, leave at least 1m of straight wire with no
obstacles front of the charging station.
18
Publicité
