8.4 Replacing the battery
WARNING : Power off before attempting any adjustment, replacement or
repair. Before replacing the blades, turn your Mower OFF and put on
protective gloves.
If you need to replace the battery, follow these steps:
1. Turn your Mower upside down.
2. Remove the screws on the battery cover. Remove the battery cover.
3. Lift out the old battery carefully. Press the latch and release the
connectors. NOTE: Do not pull by the cables. Hold the connectors and
release the latch.
4. Connect a new original battery by attaching the connectors until they
click into position.
5. Fit the battery as shown,Place the cover back in its position and tighten
the screws.
8.5 Transport
Risk of Injury
Before transporting, Carefully read the section "Safety instruction", and
follow all safety instructions exactly. Always shut off the power before
handling.
Lift and carry the robotic mower at the rear carry handle (1). Ensure that the
mowing blade always faces away from your body and that there is sufficient
distance between the mowing blade, particularly your feet and legs.
Original instructions
1
37