Publicité
Les langues disponibles
Les langues disponibles
Original instructions
6.2 Scheluding Settings
6.2.1 Manual Single Scheduling
In the settings interface, please the cursor on the "Scheduling settings" icon
and press the OK button to enter the scheduling settings menu. On the left side
of the LCD screen, the default cursor is Sunday. On the right side, the
"00:00-00:00" (manual time setting) single scheduling and trimming on/off icons
are displayed. At this point, press the START and HOME buttons to move the
cursor and select the day of the week. After confirmation, press the OK button
to enter the time setting. Press OK again and the corresponding number will
flash. Then, adjust the time by pressing START and HOME, press OK again to
confirm the modified time. Press "1" to increase or decrease the hours, press
"15" to increase or decrease the minutes. If the modified time is abnormal, the
upper left corner of the LCD screen displays "Error". At this time, press the
"ON/OFF" button to return to the previous menu, then press "ON/OFF" again
to change the set time to "00:00-00:00". After setting the time, the cursor can
be moved to the "Edge" line. Press the OK button to perform edge trimming as
soon as possible during working hours.
28
Publicité
