Publicité
Les langues disponibles
Les langues disponibles
Original instructions
3.2 Additionally when the machine is operating automatically
Do not leave the machine to operate unattended if you know that there
are pets, children or people in the vicinity.
a. Disconnect the supply (or remove the disabling device).
- after striking a foreign object to inspect the machine for damage;
- if the machine starts to vibrate abnormally, and to check for damage
before restarting.
b. Do not connect the power supply to an electrical outlet if the plug or the
cable is damaged. Do not connect or touch a damaged cable before it is
disconnected from the power supply. A damaged cable can lead to
contact with live parts
c. To connect the machine and/or its peripherals only to a supply circuit
protected by a residual current device (RCD) with a tripping current of
not more than 30 mA.
Disconnect the boundary wire from the charging station and store the
charging machine in bad weather conditions especially when there is
a risk of lightning.
3.3 Additionally when using the manual controller
a. Mow only in daylight or in good artificial light.
b. Avoid operating the machine in wet grass.
c. Do not operate the machine when barefoot or wearing open sandals.
Always wear substantial footwear and long trousers.
d. Always be sure of your footing on slopes.
e. Use extreme caution when reversing the machine towards you.
f. Always switch on the motor according to instructions with feet well
away from the blade(s).
If manully press the STOP buttom, press the HOME+OK button or the
START+OK button on the mower screen to restart the mower.
Shut the power of mower
–
before lifting or carrying the machine,
–
before transporting the machine,
–
before removing blockages.
–
before carrying out any work on the mowing blade,
–
before checking or cleaning the machine,
after hitting a foreign object or if the robotic mower begins to vibrate
excessively. In these cases check the machine, in particular the cutting
unit (blade, blade shaft, blade fastening), for damage and carry out the
necessary repairs before restarting and working with the machine.
10
Publicité
