Publicité
Les langues disponibles
Les langues disponibles
Before executing any operation, the feeder cables shall be disconnected.
Never touch the electric pump while it is working.
The pumps are capable of operating properly with no problems only if the installation is correct and the
required maintenance is guaranteed. Carefully follow the instructions of this manual. Use the
pump/group only when in perfect condition and correctly assembled. Must also be applied to the
relevant National and Local Regulations in force regarding safety, during transport, installation, electric
connection, installation, operation and eventual maintenance or demounting.
RESIDUAL RISKS
RISKS
Non-compliance with the instructions in the manual:
contact with dangerous liquid (hot, chemical, toxic, etc
...), contact with moving parts.
Residual risk during maintenance due to accidental
contacts in live parts.
Contact with elements at high temperatures:
•
Electric motor;
•
Pump
(when hot fluids are present in the
specific application)
Non-use
of
personal
inappropriate use of devices.
Non-compliance with procedures.
Noise always present during operation.
Crushing of limbs (hands / fingers / feet) during
installation / handling.
Contact with dangerous liquid (hot, chemical, toxic, etc
...) or with moving parts during maintenance (for
example in the absence of casings, pipes or guards).
PROTECTION DEVICES
Fixed guards have been provided to protect:
• cardan and elastic joints;
• impeller (door on Semi / Trash models).
The guards can be removed only after stopping, waiting for the pump to stop and disconnecting the energies present.
It is forbidden to start the pump without these guards: risk of crushing and entanglement.
3 – TRANSPORT / RECEIVING / UNPACKING / HANDLING
TRANSPORT – General notes
The transport, or rather the transfer of the machines from one location to another, must take place through the use of special
vehicles with adequate capacity (trucks, trains, vans, containers, etc ...).
Pag 22 / 48
G.M.P. S.p.A. Via Sale 119/121 – 25064 Gussago (BS) Italy
protection
devices
or
RESIDUAL RISK MANAGEMENT
The use, transport, handling, installation and maintenance of the
machine must be granted only to trained, trained and authorized
personnel who have read and understood the use and maintenance
manual.
Operators assigned to work under voltage must be trained,
instructed and authorized. Training is the responsibility of the user.
Training, signage on electric motor and surveillance.
If the fluid exceeds 50 °, provide appropriate warning signs on
site.
The user must define whether or not it is necessary to use hearing
protectors based on the actual risk of the working environment.
The installation of the machine must be carried out exclusively by
trained, trained, authorized personnel equipped with the
appropriate
personal protection devices
and understood the use and maintenance manual.
The manual states that before removing the doors or pipes to carry
out inspection and / or cleaning operations, all the power supplies
(electrical and / or pumped fluid) must be disconnected and
discharged. It is also indicated that it is necessary: to block the
electrical disconnectors in the open position and the upstream and
downstream shut-off valves in the closed position, for example by
means of padlocks. The user is responsible for defining suitable
procedures and providing personal protection devices according to
the product used and its danger.
as well as who have read
File: FiGMP001_Rev.6 Data_01-2023
Publicité
