Waste Disposal - Ugin e.ON SINTER Mode D'emploi

Instructions for use (rev 05/18)
7. Reassemble in the reverse order.
NOTE: these operations are only for damaged heating element to replace

9. WASTE DISPOSAL

- Observe the waste disposal regulations for electrical and electronic equipment: do not dispose
of with household waste.
- The unit is subject to Directive 2012/19/EU on waste electrical and electronic equipment and
to the laws of the country in which it is being used, and must be disposed of in accordance with
applicable regulations.
- The black bar beneath the crossed-out bin symbol indicates that the unit was put on
the market after 13/08/2005.
UGIN DENTAIRE
6. Place the new heating element.
The heating element (black section) must be positioned 5 mm
above the insulating ceramic blocks.
CAUTION: the ends of the heating elements must be separate
from the top cover of the furnace to avoid deformation.
e.ON SINTER
44