Real-Time Curve (Current Cycle); Interface Program Editor - Ugin e.ON SINTER Mode D'emploi

Instructions for use (rev 05/18)

6.3. Real-time curve (current cycle)

This screen shows the diagram of the current cycle (time/temperature).
On the screen are displayed two curves: the temperature setting in the cycle (blue curve) and the
temperature in real time (green curve). The green curve displayed and superimposes the blue
curve as the cycle progresses.

6.4. Interface program editor

Interface, set-up programs a total of 40 programs, composed of 40 temperature/time pairs, can be
edited and saved by selecting a different program number, each program and pairs of can be
edited.
To select a program, press the "ARROW KEY RIGHT"
numbers of programs is displayed on the screen.
UGIN DENTAIRE
or "ARROW KEY LEFT"
e.ON SINTER
: the
32