Suzuki DF15A Manuel D'utilisation page 49

ENGINE OIL
 WARNING
Never perform any ENGINE OIL proce-
dure with the motor running, as serious
injury can occur.
The motor must be shut off before any
ENGINE OIL procedures are performed.
NOTICE
Extended trolling can reduce oil life. Your
engine may be damaged if you do not
change engine oil more frequently under
this type of use.
Change your engine oil more frequently if
your engine is used for extended trolling.
Engine oil change
The oil should be changed when engine is
warm so that the oil will drain thoroughly from
the engine.
To change the engine oil:
1. Place the motor in a vertical position and
remove the motor cover.
2. Remove the oil filler cap 1.
3. Place a drain pan under the engine oil drain
screw.
 CAUTION
The engine oil temperature may be high
enough to burn your fingers when the
drain plug is loosened.
Wait until the drain plug is cool enough to
touch with bare hands before removing it.
4. Remove the engine oil drain screw 2 and
gasket 3, then let the engine oil drain.
5. After draining, secure the engine oil drain
screw with a new gasket.
NOTICE
A previously-used gasket may leak,
resulting in engine damage.
Do not re-use gaskets. Be sure to always
use new gaskets.
6. Fill with recommended engine oil to the
upper level.
Oil capacity: 1.0 L (1.1/0.9 US/Imp. qt.)
Engine oil: SAE (or NMMA FC-W) 10W-40
API (or NMMA FC-W) Classifica-
tion SG, SH, SJ, SL, SM
49