12
Siphon with device connection
If your siphon has one or more device
connector ports (e.g. the BLANCO
space-saving siphon), you can use of
these to drain dripping water from the
safety valve.
Please note the following illustrations:
12a - Mounting location of the safety valve,
12b - Shorten and route hose,
12c - Connect drain hose top,
12e - Connect drain hose bottom.
If your siphon only has one device
connection, but this is already required
for another device (e.g. dishwasher):
It is also possible to use a Y-piece (not
included in the delivery) on the device
connection.
Drainage of dripping water at the safety valve:
Siphon without device connection
If your siphon does not have a device
connector port you must use the supplied
siphon adapter to drain dripping water
from the safety valve.
Please note the following illustrations:
12a - Mounting location of the safety valve,
12b - Shorten and route hose,
12c - Connect drain hose top,
12d - Siphon adapter,
12e - Connect drain hose bottom.
eng
39