Publicité
Les langues disponibles
Les langues disponibles
eng
14
I.
15
16
42
III.
Hygiene advice:
Do not contaminate water-bearing parts!
1. Connect the red plastic tube from the
2. Connect the blue plastic tube from the
3. Connect the signal cable from the mixer tap
II.
Fully open both corner valves.
Remove the aerator from the spray head (key
is supplied with the mixer tap).
mixer tap (Ø 8 mm) to the outlet on the
bottom left at the rear of the water
conditioning unit.
mixer tap (Ø 6 mm) to the outlet on the
bottom right at the back of the water
conditioning unit.
to the socket on the top right rear of the
water conditioning unit.
Do not kink both tubes. The red tube in
particular kinks easily, so keep it short
when plugging it in.
Insert the hoses firmly and completely as
far as they will go.
Publicité
