Blanco CHOICE Icona Instructions De Montage page 47

33
+ °C
34
+ litres
35
36
Then set the desired temperature for hot
water and confirm with 'OK'.
- °C
Set the filter cartridge capacity according to
the local water hardness and confirm with
'OK'.
- litres
The system now requires an initial cleaning.
The EasyCare Adapter and the EasyCare Tab
are required for this. The filter cartridge must
be removed again for this purpose.
Press 'OK' for 3 seconds to start the cleaning
process. The adjustment wheel on the mixer
tap must not be set to '0' when you start the
cleaning process.
The cleaning process is described in the
separate user manual on page 52 in the
chapter 'Cleaning & filter change'.
When the cleaning process is complete, the
display shows the capacity of the CO
(99 %) and of the filter (99 %).
Please remember to remove the EasyCare
adapter and reinsert the filter cartridge - as
described in the user manual.
eng
cylinder
2
47