Blanco CHOICE Icona Instructions De Montage page 49

41
42
Place the system in the base cabinet.
Check the accessibility of the corner valves
and the mains plug so that they are accessible
in the event of repairs.
Check the routing of all water-carrying lines.
These must not be kinked.
WARNING - Keep ventilation openings
the back of the appliance enclosure or in
the built-in structure clear of obstruction
so that constant air exchange is ensured.
Make sure that the red hot water hose is
routed in such a way that it is not accessible
or accidentally touched. The hose should not
touch any temperature-sensitive parts. Use
insulating material if necessary.
Function and leak test on the safety valve:
Turn the safety valve knob in the indicated
direction and check that the water can drain
freely into the drip cup.
With the drain closed, fill the sink to the
maximum level. Open the drain, allow
the water to drain and check if there is a
back flow to the safety assembly, or if water
is leaking from the safety assembly drip cup
or drain hose or connections.
When the dishwasher is running, check
that when the water is pumped out of the
dishwasher, if there is a back flow to the
safety assembly, or if water is leaking from
the safety assembly drip cup or drain hose
or connections.
eng
49