Blanco CHOICE Icona Instructions De Montage page 30

eng
Carbon dioxide - CO
2
Only the original BLANCO CO cylinders with a
2
standard volume of 425 g may be used in the
system.
When fastening the CO cylinder, make sure
2
that it is screwed in tightly. Once you have
screwed in a new CO cylinder, turn it another
2
quarter as far as it will go to ensure secure
fastening.
CO cylinders are pressurised. Protect them
2
from direct sunlight, sources of heat and
overheating.
Mains connection
230 V, 10-16 A, FI-gesichert
220 - 240 V AC/50 Hz
The connection cable with plug is designed for
connection to a safety socket plug (CEE 7 type
F, type G for the United Kingdom or type J for
Switzerland).
The socket outlet must be freely accessible
after the system is installed.
Do not use standard household multiple
socket outlets. If necessary, contact BLANCO
customer service.
It is not permitted to use a direct (permanently
installed) electrical line to connect to the
power network.
Cables must be laid in such a way that they
cannot be damaged. Damaged cables must
be replaced.
Important: Magnetic field!
The spray head holder contains a strong
magnet. Patients with a pacemaker should
keep a distance of at least 25 cm.
30