Blanco CHOICE Icona Instructions De Montage page 46

eng
29
30
31
32
+ °C
46
Unscrew the protective cap from the CO
cylinder and recycle.
As soon as the display shows 'LOW' tightly
screw the cylinder into the water conditioning
unit.
When screwing in, there may be a slight
hissing sound and small amounts of CO
may escape. This is completely normal.
Firmly turn approx. one more quarter as far
as it will go.
Set the desired temperature for cooled
water on the display on the front of the
water conditioning unit and confirm with 'OK'.
'LOW' is the lowest temperature setting
(maximum cooling performance).
- °C
Note: The colder the water temperature, the
more CO the water can absorb.
2
2
2