JAC ECO+ Mode D'emploi page 16

11 ERROR CODES
Flashes or code displayed on
screen
2
3
4
5
6
7
8
9
10
11
Should the problem persist, please contact your technician.
English
Problem description
Cut-out SECU1 tripped during cycle.
Current to upper actuator (M2) in excess of
6 A for 1 second, during advance/cut.
Cut motor thermal cut-out (F3) tripped.
No actuator (M2) movement despite tension set
to maximum.
Loaf pusher not in initial position. Limit switch S1
not tripped.
Advance/cut cycle time in excess of 60 seconds.
Return cycle time in excess of 30 seconds.
Rear (S1) and front (S2) limit switches tripped at
the same time.
Current to upper actuator (M2) in excess of 5 A
for 1 second during carriage return.
Front safety cover (S3) open in the course of a
cycle.
16
Action
Please restart the
machine using the
emergency stop (fig.1,
n°10). Should the
problem persist, please
contact your technician.