Publicité
Les langues disponibles
Les langues disponibles
HID207
User Manual
Installation: Electrical
1. Plug the unit into a dedicated 15 amp outlet. The
unit must be the only device on the circuit.
2. Confirm the outlet is properly grounded and is in
good condition.
Note: Worn or loose connection outlets should be
replaced as they can cause erratic operation of
equipment.
Do not use an extension cord.
Do not cut off the ground plug on the power cord.
Ground fault outlets are not recommended. If ground
fault is required a ground fault breaker should be
used.
3. Use the services of a licensed electrician when
needed and conform to local and national codes.
4. Position the unit in its final location.
5. Level the unit front to back and left to right.
March 2024
Page 8
Publicité
